UGREEN RJ45 Crimper Tools RJ45 Crimping Pliers for CAT6/7/8 Ethernet Lan Cable Network Cutter Stripper Plier Multifuntion Tool

Here's a simplified guide for crimping a network cable:

1. Strip the Cable: Place the network cable into the wire stripping port and peel off the outer jacket.
2. Arrange the Wires: Confirm the 568A or 568B wiring standard, arrange the wires, and trim to a suitable length (about 15mm recommended).
3. Cut the Wires: After arranging the wires, use a cutter to trim them evenly.
4. Insert into Connector: Insert the trimmed wires into the RJ45 connector (crystal head).
5. Crimp the Connector: Place the connector into the crimping tool and crimp it securely.
6. Test the Cable: Insert the crimped cable into a cable tester. If the 1-8 lights turn on in sequence, the cable is ready for use.

This method ensures a properly crimped and functional network cable.